RFID ড্রপ আর্ম গেট কোমরের উচ্চতা পোর্টেবল টার্নস্টাইল এক্সেস কন্ট্রোল চাকার সাথে

Rfid Gate Control Access Waist Height Portable Turnstile Acess Control With Wheels

Drop Arm Turnstiles Barriers RS 1009-2 chassis shell is made of 2.0mm thinckness 304 stainless steel. Optical Gate Turnstiles RS 1009-2 also called Optical Barrier,Drop Arm Barrier,Drop Arm Gate,Drop Arm Door,One Arm Turnstile and so on. Drop Arm Barreira RS 1009-2 cosist of mechanism,bar,motor,electric circuit,sensors,reader etc. Optical Barriere RS 1009-2 is upgrading product of Swing Turnstiles Gate,with smaller casing and mechanism. Drop Arm Turnstile Doors RS 1009-2 reauires smaller space. Drop Arm Barrier RS 1009-2 memory can be set,swipe cards several times for group pass,fast transit speed. Drop Arm Turnike RS 1009-2 with standard fire interface,arm can drop down for evacuation even power is not cut off when fire alarm triggered. Drop Arm Turnike RS 1009-2 has sufficient space, which can mount with any type of external device.( e.g.: reader,counter,wheel,biometric reader device,push button,coin insert,card collector,display ) and so on. Drop Arm Barrier Gates RS 1009-2 has sufficient space, which can mount with any type of external device,such as: QR Code Reader,RFID,Biometric reader device,Smart Card,Fingerprint,Barcode Reader ) and so on.

 1) Alarm function: when arms are pushed by force illegally, alarm will be triggered automatically and arms will be set locked. Self-examine
2) Turnstile can set the working condition by press the button of main control board.
3) Anti-pinch function: turnstile have Mechanical / infrared induction Anti-pinch functions (when it is meet the hinder during the reset time, the electrical machine closed work automatically in specified time, the turnstile will default the delayed and reset again till reset succeed), small intensity (≤2Kg).
4) The turnstile will close the door when somebody enter the gate illegal, Tailgating or break into negative direction gate.
5)Before received the open signal, the turnstile will lock automatically.
6) The retractable can be adjustable
7) Automatic Reset Functions: after you swap the card, during the specific time (the system is 10s), if you didn’t pass the turnstile, the system will cancel your authority automatically to pass the gate, (reset time is 1~60s you can adjust it what time is suit for you). Totally meet the fire protection needs.
8)Infrared sensor reset, infrared induction anti-pinch function (3 or 5 infrared optional).
The turnstile can work with door access control system/ consumption system /biometric recognition system/ ESD system and so on.

 1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function.
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gates)
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, barcodes, fingerprints, etc. (Access controller needed).
9. Direction can be set as uni-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Support infrared photocell for anti-pinch and reset function